Selecting-a-Suitable-LED-Driver-for-Your-LED-Strip-Lights
Today we are answering yet another a single of your FAQs, this time relating to the matter of [httpswww.ukled.co.ukled-drivers.html LED Drivers] .
As LED Strip Lights have voltage and recent needs which are different to the mains electricity supply (240V AC), they want a independent unit known as an LED Driver in order to operate.
What is an LED Driver?
An LED Driver, sometimes referred to as a transformer or electricity provide, is a self-contained electrical power source that matches its output to the voltage and existing demands of the gadget it serves. Operating on a related basis to the 12V transformers in MR16 spotlight techniques, the LED Driver will take the mains electrical energy supply and changes it to 12V DC.
Which LED Driver do I need?
Drivers occur in numerous styles and sizes, and not all will be suitable for your needs. When deciding on a driver you need to think about the following:
-The energy outlet you are utilizing
-The dimensions of your LED Strip Lights.
LED Drivers come in two main versions "plug and engage in" and mains completely ready.
As the title indicates, "plug and engage in" motorists are designed for rapid and straightforward installation, and demand minimum expertise to use. The driver connects to the mains source by means of a standard Uk three-pin plug and to the strip lights via corresponding male and feminine connectors.
Mains all set drivers are designed for far more superior installations and can be hardwired immediately into your house mains, normally via a domestic house change for a entirely built-in lighting expertise. An IP67 ratingalso tends to make them suited for use in wet and damp circumstances.
As effectively as the variety, you will also have to pick a suitably sized driver. The dimensions of the driver is calculated in watts and requirements to be matched to the electrical power intake, or "load," of your LED Strip Lights.
To determine the load of your strip lights, multiply the wattage for each metre by the total variety of metres you intend to operate off a one driver. This can be expressed as follows:
wattage for each metre x variety of metres = total energy use (load)
For occasion, if you are utilizing 10 metres of LED Strip Light that consumes 7.2 watts per metre, the complete load will be ten x 7.2 = seventy two watts. In this distinct instance an a hundred watt driver will be sufficient.
Bear in mind, it is attainable to run a lot more than one particular strip light off a solitary driver. Usually check with a specialist electrician just before trying any mains electrical work.
